3D Printing Catalog
ACEO® developed a catalog with a number of generic 3D-printed models made of 100% silicone. These parts can be ordered directly through our customer service. Indicated prices are for single model orders, quotes for multiple parts can be obtained from our customer service team.
Haptic Anatomic Models
Blood Vessel, branched
This small vessel is segmented from a right lung vessel and can be taken as an example for small vascular models.
Colors: translucent-red Price: 70,00 € higher volumes upon request
Aortic Arch 1.0
The aortic arch is the vessel with the largest diameter in the human body. It distributes the freshly oxygenated blood to all body tissue as part of the systemic circulation from the heart.
Aortic Arch 2.5
The aortic arch is the vessel with the largest diameter in the human body. It distributes the freshly oxygenated blood to all body tissue as part of the systemic circulation from the heart.
Aortic Valve
The valve leaflets of this aortic valve model are separated, which allows an open or closed state of the valve by elastic deformation.
Colors: translucent-red Price: 370,00 € higher volumes upon request
Tricuspid Valve
This model shows a segment of the heart with heart wall, coronary arteries on the outside and the tricuspid valve on the inside.
Colors: translucent-red Price: 450,00 € higher volumes upon request
Test Parts
ACEO® “Sheet YX”
3D printed sheet in the YX direction for test specimen die cut in the Y direction. Dimensions: 95 mm x 120 mm x 2 mm (XYZ). One sheet fits three to four test bars depending on the test specimen.
ACEO® “ZY Sheets”
3D printed sheets in the ZY direction for test specimen cut in the Z direction. Five connected sheets are printed upwards as a “self-supporting” structure w/o support material. The part can be cut into five individual sheets. Dimensions: 2 mm x 35 mm x 120 mm (XYZ).
ACEO® EC Plate
Plate printed with electrically conductive material, allows for basic testing.
ACEO® EC Line
An electrically conductive line of material encapsulated in silicone with a pin-connector area.
Sample Parts
Lattice Structures
A set of different lattice structures: 1) Kelvin cell 2) Schwarz P 3) Octet truss. These cubes demonstrate the compression behavior of different lattice structures, printed with silicone elastomers. Outer cube dimensions: 25 mm x 25 mm x 25 mm.
Color: grey Price: 250,00 € for one set (three cubes), higher volumes upon request
Technical Membrane
This membrane demonstrates a seal-type application. The middle section is made with one printed layer only and clearly shows the transparency of the silicone. Dimensions: 60 mm x 60 mm x 5 mm.
Color: translucent Price: 50,00 € for one membrane,higher volumes upon request
Robot Gripper
Robot grippers are a very popular application that shows the capabilities of a real 3D part (hollow structures) printed with real silicone elastomer (durability). The Gripper folds when air pressure is applied to the opening at the top.
Colors: blue or grey Price: 345,00 €, higher volumes upon request
Haptic Anatomic Models
Blood Vessel, branched
This small vessel is segmented from a right lung vessel and can be taken as an example for small vascular models.
Colors: translucent-red Price: 70,00 € higher volumes upon request
Aortic Arch 1.0
The aortic arch is the vessel with the largest diameter in the human body. It distributes the freshly oxygenated blood to all body tissue as part of the systemic circulation from the heart.
Aortic Arch 2.5
The aortic arch is the vessel with the largest diameter in the human body. It distributes the freshly oxygenated blood to all body tissue as part of the systemic circulation from the heart.
Aortic Valve
The valve leaflets of this aortic valve model are separated, which allows an open or closed state of the valve by elastic deformation.
Colors: translucent-red Price: 370,00 € higher volumes upon request
Tricuspid Valve
This model shows a segment of the heart with heart wall, coronary arteries on the outside and the tricuspid valve on the inside.
Colors: translucent-red Price: 450,00 € higher volumes upon request
Test Parts
ACEO® “Sheet YX”
3D printed sheet in the YX direction for test specimen die cut in the Y direction. Dimensions: 95 mm x 120 mm x 2 mm (XYZ). One sheet fits three to four test bars depending on the test specimen.
ACEO® “ZY Sheets”
3D printed sheets in the ZY direction for test specimen cut in the Z direction. Five connected sheets are printed upwards as a “self-supporting” structure w/o support material. The part can be cut into five individual sheets. Dimensions: 2 mm x 35 mm x 120 mm (XYZ).
ACEO® EC Plate
Plate printed with electrically conductive material, allows for basic testing.
ACEO® EC Line
An electrically conductive line of material encapsulated in silicone with a pin-connector area.
Sample Parts
Lattice Structures
A set of different lattice structures: 1) Kelvin cell 2) Schwarz P 3) Octet truss. These cubes demonstrate the compression behavior of different lattice structures, printed with silicone elastomers. Outer cube dimensions: 25 mm x 25 mm x 25 mm.
Color: grey Price: 250,00 € for one set (three cubes), higher volumes upon request
Technical Membrane
This membrane demonstrates a seal-type application. The middle section is made with one printed layer only and clearly shows the transparency of the silicone. Dimensions: 60 mm x 60 mm x 5 mm.
Color: translucent Price: 50,00 € for one membrane,higher volumes upon request
Robot Gripper
Robot grippers are a very popular application that shows the capabilities of a real 3D part (hollow structures) printed with real silicone elastomer (durability). The Gripper folds when air pressure is applied to the opening at the top.
Colors: blue or grey Price: 345,00 €, higher volumes upon request