K 2016: 20th International Trade Fair for Plastics and Rubber

World Premiere: WACKER Presents the First Industrial 3D Printer for Silicones called ACEO® Imagine Series K

WACKER, the Munich-based chemical company, will be showcasing a world first at K 2016, the 20th International Trade Fair for Plastics and Rubber: the first industrial 3D printer for silicones. The high-tech device – called ACEO® Imagine Series K – will be in operation in Hall 6, Booth A10 throughout the entire tradeshow, printing parts from silicone. WACKER’s 3D printing process for the additive manufacturing of silicone parts has been the subject of discussions for months. Up to now, there is no mature 3D printing technology available for silicones. The process developed by WACKER is considered a milestone in additive manufacturing. K 2016 will take place in Düsseldorf, Germany, from October 19 to 26, 2016.

The 3D printer that will debut at the K tradeshow represents the first printer generation to industrial purposes. The ACEO® Imagine Series K prints considerably faster than protoypes available so far and is more compact in design. “The printer is based on the ACEO® technology – a drop-on-demand method developed by WACKER,” says Bernd Pachaly, head of WACKER’s silicones research and responsible for the ACEO® team. “It can be used to make parts and assemblies with complex geometries, as well as ‘impossible products,’ which could not previously be produced.”

The term “additive manufacturing,” better known as 3D printing, describes a manufacturing process in which a workpiece is built up in successive layers, without the use of a mold – i.e., it is a mold-free process. This offers designers significantly more latitude than conventional manufacturing methods. Once a product design has been generated by computer-aided design (CAD) or imaging techniques, printing can commence immediately.

“The automotive and aerospace industries are currently the main customer sectors for 3D,” says Pachaly, who started developing a system solution for 3D printing with silicones with his team in 2014. At the moment, additive manufacturing is growing most rapidly in medical applications. Biomodeling and customized geometries are particularly promising. “In these types of applications, silicones can display their favorable properties particularly well,” emphasizes the research head. “Silicones are heat resistant, flexible at low temperatures, transparent and biocompatible. They can furthermore be pigmented in any color and have good damping properties.”

With ACEO® Imagine Series K, prototypes or small series can be produced quickly and efficiently. The new 3D printing process thus offers product designers fascinating possibilities.

ACEO® technology uses a drop-on-demand method. The printer head deposits tiny silicone droplets on a substrate. In this way, the workpiece is built up layer by layer. The silicone is formulated so that the droplets flow together before the curing process begins, activated by UV light. The droplets and layers thus produce a homogeneous workpiece, which does not differ much from injection-molded parts. With the aid of water-soluble support materials, it is also possible to create overhang materials and internal lattices.

ACEO® – New Brand for 3D-Printing Development, Consultation and Services

From August 2016 on, WACKER will be offering services relating to 3D printing with silicone under the ACEO® brand. Customers will be able to upload their own designs in a webshop and order 3D-printed silicone parts. These will be produced in the ACEO® print fab and shipped around the world. Moreover, the interdisciplinary ACEO® team will offer consultation and development services for the design and manufacture of silicone parts or assemblies.

WACKER is currently building its own technology center – the so-called ACEO® campus – near its main site in Burghausen, Germany. In the future, customers will be able to test their own product ideas here in an open print lab.

Visit WACKER at K 2016 in Hall 6, Booth A10.

General Information

About ACEO®

ACEO® is a registered trademark of Wacker Chemie AG. WACKER is a globally active chemical company with some 13,450 employees and annual sales of around €4,6 billion (2016). WACKER has a global network of 23 production sites, 19 technical competence centers and 49 sales offices.

ACEO®: A Success Story

When ACEO® first introduced its technology in 2016, the development of their system solution was a milestone in additive manufacturing. Their silicones were the first elastomers which can be 3D printed while maintaining their outstanding properties such as temperature and radiation resistance or biocompatibility. ACEO® developed both hardware and software for their unique material and technology, and launched the world’s first web shop for 3D printing with silicones.

In July 2017, ACEO® opened their Open Print Lab in Burghausen to offer tailor-made 3D printing programs for customers. Participants will go through individual trainings, consisting of theoretical and printing sessions from additive manufacturing basics to advanced design. This first-hand experience helps to understand how ACEO®‘s system solution matches the customers’ needs and gives valuable insights for future product design.

Open Print Lab

Register up to four participants for a tailor-made Open Print Lab training at the ACEO® Campus in Burghausen at https://www.aceo3d.com/open-print-lab/registration/

ACEO® Web Shop

Register to ACEO®’s web shop, upload your individual design and have it 3D printed and shipped worldwide.

Further information

Wacker Chemie AG
ACEO® Campus
Gewerbepark Lindach A 12
D-84489 Burghausen

Dr. Bernd Pachaly
Head of Project 3D Printing
T +49 8677 83-2716


Press materials and photos of this document can be requested at info@aceo3d.com



Are you interested in this article